服務熱線電話
400-6188-756
通過式噴淋清洗機的工藝流程
來源:http://www.taijiaomusic.cn/ 時間: 2023-04-26 瀏覽次數: 0
通過式噴淋清洗機清洗過程由編程自動控制,設備由噴洗室、儲液箱、循環過濾系統、加熱系統、切水系統、除油系統、烘干系統。其工作原理是通過高壓水噴淋沖擊工件表面并結合清洗劑的化學去污、除油、切水能力,從而使工件達到潔凈的目的。
The cleaning process of the through type spray cleaning machine is automatically controlled by programming, and the equipment consists of a spray cleaning room, liquid storage tank, circulating filtration system, heating system, water cutting system, oil removal system, and drying system. Its working principle is to use high-pressure water spray to impact the surface of the workpiece and combine with the chemical cleaning, oil removal, and water cutting capabilities of the cleaning agent to achieve the goal of cleanliness of the workpiece.
設備主要由自動輸送鏈、噴洗室、噴淋系統、除油裝置、過濾循環系統、切水系統、烘干系統及電器控制系統等組成。
The equipment mainly consists of an automatic conveyor chain, a washing room, a spraying system, an oil removal device, a filtration and circulation system, a water cutting system, a drying system, and an electrical control system.
1、自動輸送鏈:傳送不銹鋼材質、鏈條傳動,連續通過式前進,確保清洗籃框平穩、精確運行。
1. Automatic conveyor chain: It is made of stainless steel material and driven by a chain, continuously advancing through, ensuring smooth and accurate operation of the cleaning basket frame.
2、噴淋系統:噴淋清洗共兩套,一道采用藥劑噴淋清洗,二道采用噴淋漂洗,三道采用噴淋漂洗、四道采用噴淋漂洗,五道采用噴淋防銹、內腔設噴管,噴管上設不銹鋼噴嘴,上下噴淋管噴嘴間錯布置,使清洗工件全方面在清洗區域確保工件清洗時無噴淋盲區,保證工件清洗的潔凈度。
2. Spray system: There are two sets of spray cleaning, one is using chemical spray cleaning, the second is using spray rinsing, the third is using spray rinsing, the fourth is using spray rinsing, the fifth is using spray rust prevention, the inner cavity is equipped with spray pipes, stainless steel nozzles are installed on the spray pipes, and the nozzles of the upper and lower spray pipes are arranged in a staggered manner, ensuring that there are no spray blind spots when cleaning the workpiece in the cleaning area and ensuring the cleanliness of the workpiece cleaning.
3、除油裝置:由于前清洗工位的處理量較大,所以清洗液中的含油量較多,為了防止排水中含油量過大,此工位設有除油系統。
3. Oil removal device: Due to the large processing capacity of the front cleaning station, the oil content in the cleaning solution is high. To prevent excessive oil content in the drainage, this station is equipped with an oil removal system.
4、過濾循環系統:循環過濾槽內清洗劑,提高清洗效果。采用袋式過濾器。
4. Filter circulation system: Circulates the cleaning agent in the filter tank to improve the cleaning effect. Using bag filters.
5、切水系統:切水腔內單獨排放到總排水管中,在進料和出料外設有隔離段,防止水霧互竄;前后部設可拆式檢修窗,以便于設備檢修和清理。
5. Water cutting system: The water cutting chamber is separately discharged into the main drainage pipe, and there are isolation sections outside the feed and discharge to prevent water mist from flowing together; Install detachable maintenance windows at the front and rear for easy equipment maintenance and cleaning.
6、抽氣系統:各個噴淋與風切段都在側面開有抽氣孔連接主管,主管前端配置有除霧塔內裝拉西環,配備離心風機進行抽氣
6. Air extraction system: each spraying and air cutting section is provided with an air extraction hole at the side to connect the main pipe, and the front end of the main pipe is equipped with a demister equipped with a Rasi ring and a centrifugal fan for air extraction
上一篇:超聲波振板好壞的怎么辨別?
下一篇:高壓噴淋清洗機的工作是這樣達成的?
相關產品
相關文章
-
通過式噴淋清洗機:為什么洗不干凈? 2024-11-22
-
高壓去毛刺清洗機:遇見故障莫慌張,依次排查按文章 2024-11-21
-
單工位旋轉噴淋清洗機:為什么與其他清洗機相比要選擇它? 2024-11-20
-
碳氫清洗機:為何碳氫清洗機會清洗的干凈 2024-11-18
-
超聲波清洗機的弊端 2024-11-16
-
高壓去毛刺清洗機的保養秘訣 2024-11-14
-
超聲波清洗機的工作原理 2024-11-12
-
了解噴淋清洗機的特點和應用 2024-11-07
-
如何使用碳氫清洗機? 2024-11-05
-
污水低溫蒸發設備的結構運行特點有哪些? 2024-10-31